| |
 |
Machine Screw Fore End
Set includes 7/8" machine screw fore end swivel stud with nut, 3/4" wood screw stud rear, spacers and pair of GT Locking Swivels.
- GTSW-07 - 1" Loops - Black-Oxide Finish
- GTSW-08 - 1-1/4" Loops - Black-Oxide Finish
- GTSW-09 - 1" Loops - Satin Nickel Finish
|
 |
Wood Screw Fore End
Set includes 1/2" wood screw fore end swivel stud, 3/4" wood screw rear, spacers and pair of GT Locking Swivels.
- GTSW-23 - 1" Loops - Black-Oxide Finish
- GTSW-14 - 1" Loops - Satin Nickel Finish
|
 |
Ruger All-Weather Stock
Set replaces non-detachable factory loop and includes Chicago screws to fill holes from factory-installed swivels. Contains 3/8" machine screw stud with nut and washer, 1/4" rear swivel stud, Chicago screws and one pair GT Locking Swivels. Fits Models 77 and 77/22 All-Weather Stocks.
- GTSW-10 - 1" Loops - Satin Nickel Finish
|
|
|
| |
 |
742 BDL Rifles
Precise adaptor bolt swivel base and spacers simply replace factory fore end bolt on 742 BDL. Also includes 3/4" rear wood screw stud with spacer and one pair GT Locking Swivels.
- GTSW-15 - 1" Loop - Black-Oxide Finish
|
 |
7400 & Four Autoloaders
Set includes custom adaptor bolt swivel base with spacers for exact fit, 3/4" rear swivel stud with spacer and one pair GT Locking Swivels.
- GTSW-16 - 1" Loops - Black-Oxide Finish
|
 |
742 ADL
Adaptor bolt swivel base and spacers provide exact fit on 742 ADL and Standard models. Does not fit BDL. Includes adapter bolt, 3/4" rear wood screw swivel stud, spacers, and one pair GT Locking Swivels.
- GTSW-17 - 1" Loops - Black-Oxide Finish
|
 |
760 and 7600 (1968 and older)
Custom adaptor bolt swivel base and spacers replace factory bolt to provide an exact fit. Set includes adaptor bolt, 3/4" rear wood screw swivel stud, spacers and one pair GT Locking Swivels.
- GTSW-18 - 1" Loops - Black-Oxide Finish
|
 |
760 and 7600 (1969 to present)
Barrel band set fits Remington 760's, 7600 and Six Pump Actions, 740, 742, and other .22 caliber and centerfire rifles with .645"-.660" diameter barrels. Set includes barrel band, 3/4" rear wood screw stud, spacer and one pair GT Locking Swivels.
- GTSW-45 - 1" Loops - Black-Oxide Finish
|
|
|
| |
 |
.630" to .675" Diameter Tubes
Two-piece band fits magazine tubes .630"-.675" diameter, band barrels of certain Browning and Ruger models and .410 shotguns. Set also includes 3/4" rear wood screw swivel stud, Allen wrench and one pair GT Locking Swivels.
- GTSW-43 - 1" Loop - Black-Oxide Finish
- GTSW-44 - 1-1/4" Loops - Black-Oxide Finish
|
 |
.645" to .660" Full Band
One-piece band fits tube diameters of .645"-.660" for Winchester and Marlin centerfire lever actions. Set also includes 3/4" rear wood screw swivel stud and one pair GT Locking Swivels.
- GTSW-41 - 1" Loop - Black-Oxide Finish
|
 |
Fore End Band Mount
Custom machine screw fore end base allows for mounting on Mossberg 500 shotguns and tube magazine lever action rifles, carbines with fore end band. Some gunsmithing required. Set also includes 3/4" rear wood screw swivel stud, spacer and one pair GT Locking Swivels.
- GTSW-31 - 1" Loops - Black-Oxide Finish
|
|
|
| |
|
.420" to .470" Diameter Tubes
Two-piece band attaches to tube magazines of .420"-.470" diameter without dismantling gun. Set also includes 3/4" rear swivel stud with spacer, Allen wrench and one pair GT Locking Swivels.
- GTSW-40 - 1" Loops - Black-Oxide Finish
|
|
.430" to .445" Full Band
Once piece band fits most .22's with tube diameters of .430"- .445". Does not fit Winchester 94/22M. U.S. Set also includes 3/4" rear swivel stud with spacer, Allen wrench and one pair GT Locking Swivels.
- GTSW-42 - 1" Loops - Black-Oxide Finish
|
|
|
| |
 |
Centerfire Lever Actions
Classically styled for Winchester 94, Marlin 36, Marlin 336 and others, this set features a one-piece band for tube magazines .640-.660" diameter. Includes 3/4" non-detachable woodscrew swivel rear.
- GTSW-24 - 1" Loops - Black-Oxide Finish
|
 |
Machine Screw Fore End
Set features 7/8" machine screw nondetachable fore end swivel and 3/4" wood screw non-detachable swivel rear.
- GTSW-76 - 1" Loops - Black-Oxide Finish
- GTSW-77 - 1-1/4" Loops - Black-Oxide Finish
|
 |
Wood Screw Fore End
Set features 1/2" wood screw nondetachable fore end swivel and 3/4" wood screw non-detachable swivel rear.
- GTSW-78 - 1" Loops - Black-Oxide Finish
|
|
|
| |
 |
T/C Contenders
Selection of machine screw swivel studs and spacers easily replace fore end and grip bolts on all factory and non-factory fore ends and grips. Set includes one pair GT Locking Swivels.
- GTSW-22 - 1" Loop - Black-Oxide Finish
|
 |
Remington Nylon .22
Precision studs mount on Remington nylon stock with drill and tap. Includes one pair GT Locking Swivels.
- GTSW-21 - 1" Loops - Black-Oxide Finish
|
 |
Winchester 70A
Fore end swivel stud and metal spacer replace factory-installed nondetachable swivel. Includes 3/4" rear wood screw swivel stud, spacers and one pair GT Locking Swivels.
- GTSW-25 - 1" Loops - Black-Oxide Finish
|
 |
Ithaca M37, M87 and DeerSlayer
Custom fore end swivel base screws into barrel lug on Ithaca 37's, Ithacagun 87's, Deerslayer, DSPS and M&P models with regular and extended magazines. Other 37's require drill and tap. Also includes 3/4" rear swivel stud and one pair GT Locking Swivels.
- GTSW-26 - 1" Loops - Black-Oxide Finish
|
 |
Ruger Carbines, Auto & Single Shot
Packaged with both fore end adaptor to fit 10/22, .44 Mag. and No. 3 carbines and 1/2" wood screw suitable for fore end stock mounting. Also includes 3/4" wood screw swivel stud rear and one pair GT Locking Swivels.
- GTSW-27 - 1" Loop - Black-Oxide Finish
- GTSW-28 - 1" Loop - Satin Nickel Finish
|
 |
Browning BLR
Included fore end replacement spacer provides simplified mounting. Set also contains 3/4" wood screw stud rear and one pair GT Locking Swivels. Does not fit BLR Lightning.
- GTSW-29 - 1" Loops - Black-Oxide Finish
|
 |
Savage 99
Fore end stud and spacer replaces stock screw exactly. No modifications required. Also includes 3/4" wood screw swivel stud rear, spacer and one pair GT Locking Swivels.
- GTSW-32 - 1" Loops - Black-Oxide Finish
|
 |
Ruger Mini-14
Fits pre- and post-1978 Mini 14's with provisions to accommodate factory and non-factory stocks. Requires modifications to gas block on current models. Set includes one pair GT Locking Swivels.
- GTSW-13 - 1" Loops - Black-Oxide Finish
|
|
|
|
